Tail Lamp Replacement. Chevrolet Avalanche - 4WD 2009

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 4WD 🢒 Body Systems 🢒 Lighting 🢒 Tail Lamp Replacement

Tail Lamp Replacement Chevrolet Tahoe Two-Mode Hybrid

Object Number: 1965002 Size: SF

Callout	Component Name
Preliminary Procedure Open the liftgate in order to access the light emitting diode (LED) tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Tail Lamp Electrical Harness Assembly Connector Tip Disconnect the tail lamp electrical connector from the rear tail lamp assembly.
3	Tail Lamp Assembly Tip Upon installation, push inward on the outer edge of the tail lamp in order to seat the 2 locating pins to the outer body panel nuts prior to installing the screws.

Tail Lamp Replacement Avalanche

Object Number: 1739484 Size: SF

Callout	Component Name
Preliminary Procedure Open the endgate in order to access the tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Tail Lamp Wiring Harness Assembly Connector
3	Tail Lamp Assembly Tip Upon installation, push inward on the tail lamp in order to seat the 2 locating pins in the body panel.

Tail Lamp Replacement Cadillac

Object Number: 1669953 Size: SF

Callout	Component Name
Preliminary Procedure Open the liftgate in order to access the tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Tail Lamp Assembly Locator Pin (Qty: 2) Tip Upon tail lamp removal, some effort is needed to disengage the locating pins from the rear body panel retainer nuts.
3	Tail Lamp Retainer (Qty: 2)
4	Tail Lamp Wiring Harness Assembly Connector
5	Tail Lamp Assembly Tip Upon installation of the tail lamp, push inward on the lamp in order to seat the 2 locator pins into the retainer nuts.

Tail Lamp Replacement Tahoe, Yukon

Object Number: 1669959 Size: SF

Callout	Component Name
Preliminary Procedure Open the liftgate in order to access the tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Tail Lamp Assembly Locator Pin (Qty: 2) Tip Upon tail lamp removal, some effort is needed to disengage the locating pins from the rear body panel retainer nuts.
3	Tail Lamp Retainer Nut (Qty: 2)
4	Tail Lamp Wiring Harness Assembly Connector
5	Tail Lamp Assembly Tip Upon installation, push inward on the tail lamp in order to seat the 2 locating pins.

Tail Lamp Replacement GMC Yukon Two-Mode Hybrid

Object Number: 1965002 Size: SF

Callout	Component Name
Preliminary Procedure Open the liftgate in order to access the tail lamp assembly screws.
1	Tail Lamp Assembly Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Tail Lamp Electrical Harness Assembly Connector Tip Disconnect the tail lamp bulb and side marker lamp bulb sockets from the lamp assembly.
3	Tail Lamp Assembly Tip Upon installation, push inward on the outer edge of the tail lamp in order to seat the 2 locating pins to the outer body panel nuts.