GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Avalanche - 4WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Pedal Assembly Replacement

Removal Procedure

    Object Number: 344194 Size: SH
  1. Remove the pushrod retaining clip (4).
  2. Remove the stop lamp switch (2) and the pushrod (3) from the brake pedal stud (1).

    3. Object Number: 375693 Size: SH
  3. Remove the nut from the brake pedal bolt.
  4. Remove the brake pedal bolt.
  5. Remove the brake pedal.

Installation Procedure

    Object Number: 375693 Size: SH
  1. Install the brake pedal.
  2. Install the brake pedal bolt.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nut to the brake pedal bolt.

    4. Tighten
    Hold the nut with a wrench and tighten the brake pedal bolt to 47 N·m (35 lb ft).


    Object Number: 344194 Size: SH
  4. Install the pushrod (3) and the stop lamp switch (2) to the brake pedal pin (1).
  5. Install the pushrod retaining clip (4).