GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Avalanche - 4WD 🢒 Body 🢒 Doors 🢒 Front Side Door Window Module Replacement

Removal Procedure
  1. Raise and support the window glass.
  2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Disconnect the harness from the electric window motor assembly.
  5. Remove the 2 bolts that hold the window glass to the regulator.

    6. Object Number: 348453 Size: SH
  6. Remove the bolts from the window regulator.
  7. Remove the window regulator assembly from the door by folding both sides of the window regulator assembly together.

Installation Procedure

    Object Number: 348453 Size: SH
  1. Position the regulator to the inside door structure. A slight twisting motion of the regulator is needed.
  2. Ensure the regulator is positioned firmly in the door.

    3. Notice: Refer to Fastener Notice in the Preface section.

    Important: Place Permatex Threadlocker, Part Number 24200, GM P/N 12345382, onto the regulator bolt threads prior to tightening.

  3. Install the bolts to the window regulator.

    4. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  4. Align the window glass to the regulator.
  5. Install the bolts that hold the window to the regulator.

    6. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
  8. Lower the window and inspect the operation.