GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Avalanche - 4WD 🢒 Body and Accessories 🢒 Stationary Windows 🢒 Windshield Side Reveal Molding Replacement

Removal Procedure

    Object Number: 441415 Size: SH
  1. Pull back the front door sealing weatherstrip (1) to expose the windshield reveal molding screws.

    2. Object Number: 301107 Size: SH
  2. Remove the screws from the windshield reveal molding.
  3. Remove the windshield reveal molding from the windshield pillar.

Installation Procedure
  1. Install the windshield reveal molding to the windshield pillar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 301107 Size: SH
  2. Install the screws to the windshield reveal molding.

    3. Tighten
    Tighten the screws to the windshield reveal molding to 2 N·m (18 lb in).


    Object Number: 441415 Size: SH
  3. Install the front door sealing weatherstrip (1) to the pinch-weld.
  4. Close the door.