Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics | |||
1 | Did you perform the Lighting Diagnostic System Check? | Go to Step 2 | |
2 | Turn ON the reading lamps. Does the system operate normally? | Go to Testing for Electrical Intermittents in Wiring Systems | Go to Step 3 |
3 | Do any courtesy lamps operate correctly? | Go to Step 4 | |
4 | Remove and inspect the bulbs. Are the bulbs okay? | Go to Step 5 | Go to Step 7 |
5 |
Does the test lamp illuminate? | Go to Step 6 | Go to Step 9 |
6 | Connect a lamp between the ground circuit of the reading lamp and a battery positive voltage circuit. Does the test lamp illuminate? | Go to Step 8 | Go to Step 10 |
7 | Inspect for poor connections at the harness connector of the bulbs. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 13 | Go to Step 11 |
8 | Inspect for poor connections at the harness connector of the dome lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 13 | Go to Step 12 |
9 | Repair the open in the courtesy lamps supply voltage circuit between reading lamp and the body wiring harness junction block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 13 | -- |
10 | Repair the lamp ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 13 | -- |
11 | Replace the bulbs as necessary. Did you complete the replacement? | Go to Step 13 | -- |
12 | Replace the reading lamp assembly. Refer to Dome Lamp Replacement . Did you complete the replacement? | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
