Test Description
The numbers below refer to the step numbers on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The presence of DTCs indicates that the transfer case shift control module has detected a fault. Go to symptoms for other concerns.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
-
Vehicle speed is provided to the transfer case shift control module via Class 2 and can effect the setting of DTC C0300. Perform the diagnostics for powertrain DTCs P0502 and P0503 first.
-
Perform diagnostics for DTC C0300 and C0305 first before addressing other DTCs. DTC C0300 and C0305 can be responsible for setting other DTCs.
Step | Action | Yes | No |
|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | |
Does the scan tool communicate with the transfer case shift control module? | Go to Step 3 | ||
Select the transfer case shift control module display DTCs function on the scan tool. Does the scan tool display any DTCs? | Go to Step 4 | Go to Symptoms - Transfer Case | |
Does the scan tool display any DTCs which begin with a "U"? | Go to Step 5 | ||
Does the scan tool display DTC P0502 or P0503? | Go to Diagnostic System Check - Engine Controls 4.8L, 5.3L and 6.0L in Engine Controls | Go to Step 6 | |
Does the scan tool display DTC C0300 or C0305? |
