GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

Schematic Reference: Suspension Controls Schematics

1

Did you perform the RTD Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Real Time Damping

2

Verify the fault is present.

Does the system operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. Using a scan tool, access the RTD Special Functions menu and command the SERVICE RIDE CONTROL message OFF.

Does the message go off when commanded?

Go to Step 5

Go to Step 4

4

Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.

Did you complete the replacement?

Go to Step 6

--

5

Replace the ESC module. Refer to Electronic Suspension Control Module Replacement .

Did you complete the replacement?

Go to Step 6

--

6

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2