GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Avalanche - 4WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Rear Quarter Trim Panel Replacement - Right Side

Rear Quarter Trim Panel Replacement - Right Side Utility

Removal Procedure
  1. Remove the rear seat. Refer to Rear Bench Seat Replacement in Seats.
  2. Remove the Third Pillar trim panel. Refer to Third Pillar Trim Replacement .
  3. Remove the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  4. Remove the door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  5. Remove the quarter panel trim screws.

    6. Object Number: 276495 Size: SH
  6. Remove the quarter panel trim from the vehicle.

    7. Lift the quarter panel to release the quarter panel from the vehicle.

Installation Procedure

    Object Number: 276495 Size: SH
  1. Install the quarter panel trim to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the quarter panel trim screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  4. Install the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  5. Install the Third Pillar trim panel. Refer to Third Pillar Trim Replacement .
  6. Install the rear seat. Refer to Rear Bench Seat Replacement in Seats.

Rear Quarter Trim Panel Replacement - Right Side Suburban

Removal Procedure
  1. Remove the rear seat. Refer to Rear Seat Replacement in Seats.
  2. Remove the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  3. Remove the trim panel. Refer to Third Pillar Trim Replacement .
  4. Remove the door sill plate. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .

    5. Object Number: 521852 Size: SH
  5. Remove the quarter panel trim screws.
  6. Remove the quarter panel trim from the vehicle.

Installation Procedure

    Object Number: 521852 Size: SH
  1. Install the quarter panel trim to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the quarter panel trim screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the door sill plate. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
  4. Install the trim panel. Refer to Third Pillar Trim Replacement .
  5. Install the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  6. Install the rear seat. Refer to Rear Seat Replacement .