Exhaust Hanger Mounting Bracket Replacement 6.0L and 8.1L Engines

1. Remove the exhaust manifold pipe. Refer to Exhaust Manifold Pipe Replacement .
2. Remove the catalytic converter. Refer to Catalytic Converter Replacement .
3. Remove the exhaust pipe hanger bracket bolts.
4. Remove the exhaust manifold pipe bracket.

1. Install the exhaust manifold pipe hanger bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the exhaust pipe hanger bracket bolts.

Tighten
Tighten the bolts to 12 N·m (106 lb in).

3. Install the catalytic converter. Refer to Catalytic Converter Replacement .
4. Install the exhaust manifold pipe. Refer to Exhaust Manifold Pipe Replacement .