Steering Column Shroud Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 2WD 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Steering Column Shroud Replacement

Steering Column Shroud Replacement Without Electronic Tilt Steering

Callout	Component Name
1	Tilt Lever Procedure Remove by pulling straight outwards.
2	Upper Steering Column Shroud
3	Lower Steering Column Shroud Caution: Refer to Fastener Caution in the Preface section. Procedure If equipped, remove the 2 lower steering column shroud bolts. Install 2 lower steering column shroud bolts if damage exists to the steering column shroud locking features. Tighten 3 N·m (27 lb in)

Callout

Component Name

Tilt Lever

Remove by pulling straight outwards.

Upper Steering Column Shroud

Lower Steering Column Shroud

Caution: Refer to Fastener Caution in the Preface section.

If equipped, remove the 2 lower steering column shroud bolts.
Install 2 lower steering column shroud bolts if damage exists to the steering column shroud locking features.

Tighten
3 N·m (27 lb in)

Callout	Component Name
1	Lower Steering Column Shroud Bolt Caution: Refer to Fastener Caution in the Preface section. Tighten 3 N·m (27 lb in)
2	Lower Steering Column Shroud Procedure Disconnect any electrical connectors as needed. Disconnect the shift lever seal from the steering column lower trim cover.
3	Upper Steering Column Shroud Bolt Tighten 2 N·m (18 lb in)
4	Upper Steering Column Shroud Procedure Disconnect the shift lever seal from the steering column upper trim cover.