Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Front Position Sensor Link

Tip
Disconnect the link from the sensor ball stud.

2

Front Position Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the bolt from the sensor.

Tighten
12 N·m (106 lb in)

3

Front Position Sensor

Tip
Disconnect the electrical connector from the sensor.