Preliminary Procedure

1. Remove the right windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement.
2. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement.
3. Remove the right lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement .
4. Remove the screw from the HVAC duct and reposition the duct away from the antenna module to allow access.
5. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
6. Lower the headliner. Refer to Headlining Trim Panel Replacement.

1

Radio Antenna Cable

Tip

1. Disconnect the antenna cable from the extension cable located on the top of the instrument panel on the right side.
2. Disconnect the antenna cable from the antenna module.
3. Note the routing of the antenna cable on the headliner for aid in installation.
4. Remove the antenna cable from the headliner.