GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Avalanche - 2WD 🢒 Engine 🢒 Engine Controls and Fuel - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L 🢒 Air Conditioning Compressor Bracket Replacement

Air Conditioning Compressor Bracket Replacement Non HP2

Removal Procedure
  1. Remove the A/C compressor. Refer to Air Conditioning Compressor Replacement .
  2. Remove the A/C belt tensioner bolts.
  3. Remove the A/C belt tensioner.

    4. Object Number: 363185 Size: SH
  4. Remove the A/C compressor bracket mounting bolts.
  5. Remove the A/C compressor bracket.

Installation Procedure

    Object Number: 363185 Size: SH
  1. Install the A/C compressor bracket.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the A/C compressor bracket mounting bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  3. Install the A/C belt tensioner.
  4. Install the A/C belt tensioner bolts.

    5. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  5. Install the A/C compressor. Refer to Air Conditioning Compressor Replacement .

Air Conditioning Compressor Bracket Replacement HP2


Object Number: 1971988 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the air conditioning compressor. Refer to Air Conditioning Compressor Replacement .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the engine shield. Refer to Engine Shield Replacement .
  4. Remove the oil pan slid plate. Refer to Oil Pan Skid Plate Replacement .
  5. Remove transmission cooler bracket.

1

A/C Compressor Bracket Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

A/C Compressor Bracket Bolt (Qty: 2)

Tighten
50 N·m (37 lb ft)

3

A/C Compressor Bracket Bolt (Qty: 3)

Tighten
50 N·m (37 lb ft)

4

A/C Compressor Bracket