Hood Front Molding Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Avalanche - 2WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Hood Front Molding Replacement

Hood Front Molding Replacement Cadillac Escalade

Callout	Component Name
Preliminary Procedure Open the hood in order to access the front hood molding and retainers.
1	Hood Front Molding Tip The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength. Release the 7 integral retainers from the hood. Upon installation, align the left hand center retainer first into the hood. Gently secure the remaining retainers working from left to right across the entire hood molding.

Callout

Component Name

Open the hood in order to access the front hood molding and retainers.

Hood Front Molding

Tip

The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
Release the 7 integral retainers from the hood.
Upon installation, align the left hand center retainer first into the hood.
Gently secure the remaining retainers working from left to right across the entire hood molding.