1

Fluid Pump Cover Assembly

2

Fluid Pump Cover Bolts M6 x 40 (Qty: 13)

Tip
Hand tighten only.

3

Alignment Tool and Bolt

Notice: Refer to Fastener Notice in the Preface section.

Procedure

1. Center the J 46664 around the fluid pump cover assembly in the 9 o'clock position and tighten the alignment bolt.
2. Tighten the fluid pump cover bolts in the sequence shown.

Tighten
11 N·m (97 lb in)

Special Tool

J 46664 Pump Cover Alignment Tool

4

NEW 1-2-3-4 and 3-5 Reverse Clutch Housing Thrust Washer