For 1990-2009 cars only
- Measure the angle between the surfaces of the following retaining brackets at angle A:
- Adjust the bracket surfaces to the specified amount.
Important: If any of the following specifications are not met, replace the retaining bracket.
| • | Pressure control solenoid 1 (PCS1) and PCS2 retaining bracket (1) |
| • | Torque converter clutch pressure control solenoid (TCC PCS) retaining bracket (2) |
Specification
The angle between the surfaces of the PCS1 and PCS2 retaining bracket and the TCC PCS retaining bracket are approximately 82.84 degrees.
