Radiator Grille Emblem/Nameplate Replacement Cadillac

1. Mask grille in the area surrounding the emblem to prevent damage to the painted surface.
2. Remove the emblem (1) from the grille (2) using a small plastic flat-bladed tool.
3. Remove all traces of adhesive from the grille surface using an oil-free naphtha or alcohol.

1. Remove the protective tape from the adhesive strip on the grille emblem (1).
2. Install the emblem (1) onto the grille (2) centering the emblem on the mating surface.
3. Remove the masking tape from the painted surface surrounding the emblem.

Radiator Grille Emblem/Nameplate Replacement Chevrolet

1. Remove the upper grille baffle.



2. Remove the retaining nuts (3) from the rear of the grille emblem (1).
3. Separate and remove the emblem (1) from the grille (2).

1. Install the emblem (1) onto the grille (2).

Notice: Refer to Fastener Notice in the Preface section.

2. Install the retaining nuts (3) and tighten.

Tighten
Tighten the retaining nuts to 3 N·m (27 lb in).




3. Reinstall the upper grille baffle.

Radiator Grille Emblem/Nameplate Replacement GMC

1. Remove the upper grille baffle.



2. Release the retaining clips on the rear of the grille emblem (1) using a small flat-bladed tool.
3. Separate and remove the emblem (1) from the grille (2).

1. Install the emblem (1) onto the grille (2) lining up the retaining clips with the openings.
2. Push rearward on the emblem until the retaining clips are fully seated.



3. Reinstall the upper grille baffle.