GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Astro - 4WD 🢒 Body 🢒 Interior Trim 🢒 Center Pillar Garnish Molding Replacement - Left Side

Removal Procedure
  1. Remove the retaining screw from the garnish molding.
  2. Remove the driver's side seat belt upper mounting bolt. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.

    3. Object Number: 314679 Size: SH
  3. Pull back on the garnish molding in order to release the fasteners.
  4. Remove the garnish molding from the pillar.

Installation Procedure

    Object Number: 314679 Size: SH
  1. Install the garnish molding to the pillar:
    2. 1.1. Align the locator pin with the pillar.
    1.2. Press the locator pin firmly into place, seating all fasteners.
  2. Install the driver's seat belt upper mounting bolt. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the garnish molding retaining screw.

    4. Tighten
    Tighten the garnish molding retaining screw to 2 N·m (18 lb in).