GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Front Floor Mat/Carpet Replacement

Removal Procedure
  1. Remove the seats and the risers. Refer to Bucket Seat Replacement .
  2. Remove the engine cover, if required. Refer to Engine Cover Replacement .
  3. Remove the trim plates from the front door openings. Refer to Carpet Retainer Replacement .
  4. Remove the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement .
  5. Remove the throttle pedal guard.
  6. Remove the screws from the center floor air duct.
  7. Remove the center floor air duct.
  8. Remove the front side door lock pillar garnish molding, if required. Refer to Center Pillar Garnish Molding Replacement - Left Side .

    9. Object Number: 314667 Size: SH
  9. Remove the carpet/mat from the vehicle.

Installation Procedure

    Object Number: 314667 Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Install the carpet/mat to the vehicle.
  2. Install the center floor air duct.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws to the center floor air duct.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the front side door lock pillar garnish molding, if required. Refer to Center Pillar Garnish Molding Replacement - Left Side .
  5. Install the trim plates to the front door openings. Refer to Carpet Retainer Replacement .
  6. Install the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement .
  7. Install the engine cover, if required. Refer to Engine Cover Replacement .
  8. Install the seats and the risers. Refer to Bucket Seat Replacement in Seats.