Waterleak at Top of Windshield (Seal Pinhole)

Some customers may comment that there is water dripping from the top of the windshield.

Important: A large amount of water may be able to enter the vehicle through small holes in the body seam sealer.

The water may be entering from a pinhole in the body seam sealer at the upper "A" pillar. Refer to the illustration above.

The water may also be entering from a pinhole in the body seam sealer at the "B" pillar and then runs forward to the windshield. Refer to the illustrations above.

1. The affected surface must be clean, dry and free of dirt or contaminants. Clean the surface with one of the cleaners listed below, or equivalent.

•	3M® General Purpose Adhesive Cleaner, P/N 08984

•	Dominion Sure Seal, Sure Solve BSS

•	Kent Acrosol

2. Fill the pinhole(s) with a clear seam sealer.

For vehicles repaired under warranty, use: