SMU - SEC. 2F - STEERING WHEEL & COLUMN ON VEH.

SUBJECT: SERVICE MANUAL UPDATE - SECTION 2F - STEERING WHEEL AND COLUMN ON-VEHICLE SERVICE - NEW REMOVAL/INSTALLATION PROCEDURE FOR 1998I NEXT GENERATION AIR BAG (RPO CTF)

MODELS: 1998 CHEVROLET AND GMC M/L MODELS

THIS BULLETIN IS BEING ISSUED TO ADD THE PROCEDURE FOR REMOVAL/INSTALLATION OF THE STEERING WHEEL INFLATOR MODULE, THE HORN SWITCH, AND THE STEERING WHEEL TO SECTION 2F OF THE SERVICE MANUAL.

PLEASE ADD THE ATTACHED TO THE SERVICE MANUAL.

FIGURES: 00 ATTACHMENTS: 07

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1998 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.