GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim panel. Refer to Door Trim Panel Replacement .

  2. Object Number: 324184  Size: SH
  3. Remove the access hole cover screws.

  4. Object Number: 324183  Size: SH
  5. Remove the access hole cover.

Installation Procedure


    Object Number: 324183  Size: SH
  1. Install the access hole cover.

  2. Object Number: 324184  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the access hole cover screws.
  4. Tighten
    Tighten the access hole cover screws to 2 N·m (18 lb in).

  5. Install the trim panel.