GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

2

Do the wipers operate with the wiper switch in HI?

--

Go to Step 4

Go to Step 3

3

Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement in Steering.

Is the replacement complete?

--

Go to Wiper/Washer System Check

--

4

  1. Turn the ignition switch to RUN.
  2. Turn the wiper switch to HI.
  3. Backprobe with a test light from the wiper/washer switch connector terminal A to ground.

Is the test light on?

--

Go to Step 8

Go to Step 5

5

Check for a poor connection condition to the wiper/washer switch connector.

Is a poor connection condition present?

--

Go to Step 6

Go to Step 7

6

Repair the poor connection condition to the wiper/washer switch connector.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

7

Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement in Steering.

Is the replacement complete?

--

Go to Wiper/Washer System Check

--

8

  1. Disconnect the wiper motor connector.
  2. Connect the test light between wiper motor connector terminal C and ground.

Is the test light on?

--

Go to Step 10

Go to Step 9

9

Repair the open circuit condition in CKT 92.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

10

Check for a poor connection condition to the wiper motor.

Is a poor connection condition present?

--

Go to Step 11

Go to Step 12

11

Repair the poor connection condition to the wiper motor.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

12

Replace the wiper motor. Refer to Windshield Wiper Motor Replacement

Is the replacement complete?

--

Go to Wiper/Washer System Check

--