Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, inspect the fuse(s) for an open.

Did you perform the Instrument Cluster System Check?

--

Go to Step 2

Go to Instrument Cluster System Check

1. Turn the ignition switch to the ON position.
2. With the scan tool select Instrument Panel Cluster, Special Functions, IPC Gauges and command the tachometer UP.

Does the tachometer complete a full sweep when commanded?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls

Go to Step 3

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Did you complete the repair?

--

Go to Instrument Cluster System Check

--