GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Instrument Cluster Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1224708 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement.
  3. Carefully lift the head-up display (HUD) electrical harness from between the instrument panel cluster (IPC) and the HUD.
  4. Disconnect the HUD electrical connector from the IPC.
  5. Remove the IPC to steering column bracket retaining screws.
  6. Raise the rear of the IPC slightly, then lift the IPC to access the electrical connector.
  7. Disconnect the IPC electrical connector.
  8. Remove the IPC.

Installation Procedure
  1. Connect the IPC electrical connector.
  2. Position the IPC to the steering column bracket.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1224708 Size: SH
  3. Install the screws which retain the IPC to the steering column bracket and tighten to 3 N·m (27 lb in).
  4. Connect the HUD electrical connector to the IPC.
  5. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement.
  6. Connect the negative battery cable. Tighten the bolt to 15 N·m (11 lb ft).
  7. Refer to Control Module References for programming and setup information.