GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the hood.
  2. Remove the hood insulator. Refer to Hood Insulator Replacement.

  3. Object Number: 916439  Size: SH
  4. Disconnect the electrical connector (1) from the underhood lamp (2) assembly.
  5. Warning: Refer to Safety Glasses Warning in the Preface section.


    Object Number: 916411  Size: SH
  6. Drill out the rivets (1) attaching the underhood lamp (2) to the hood.
  7. Remove the underhood lamp (2) from the hood.

Installation Procedure


    Object Number: 916411  Size: SH
  1. Position the underhood lamp (2) to the hood.
  2. Rivet (1) the underhood lamp (2) to the hood.

  3. Object Number: 916439  Size: SH
  4. Connect the electrical connector (1) to the underhood lamp (2).
  5. Inspect the underhood lamp for proper operation.
  6. Install the hood insulator. Refer to Hood Insulator Replacement.
  7. Close the hood.