GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 66493  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
  3. Remove the stabilizer shaft insulator clamps from the front crossmember.
  4. Remove the stabilizer shaft insulators from the stabilizer shaft.

Installation Procedure


    Object Number: 66493  Size: SH
  1. Install the stabilizer shaft insulators to the stabilizer shaft.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer shaft insulator clamps and bolts and tighten to 58 N·m (43 lb ft).
  4. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
  5. Lower the vehicle.