GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn OFF the ignition switch.
  2. Raise the vehicle on a suitable safety stand. Refer to Lifting and Jacking the Vehicle.
  3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

  4. Object Number: 925350  Size: SH
  5. Disconnect the electronic suspension control (ESC) position sensor harness connector.

  6. Object Number: 925355  Size: SH
  7. Remove the position sensor link from the control arm link stud.
  8. Remove the position sensor mounting bolts.
  9. Remove the position sensor from the vehicle.

Installation Procedure


    Object Number: 925355  Size: SH
  1. Install the position sensor in the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the position sensor mounting bolts and tighten to 3 N·m (26 lb in).
  4. Install the position sensor link to the control arm link stud.

  5. Object Number: 925350  Size: SH
  6. Connect the ESC position sensor harness connector.
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  8. Lower the vehicle.