GM Service Manual Online
For 1990-2009 cars only

Object Number: 1655590  Size: MF

Callout

Component Name

1

Engine Sight Shield

Tip
Remove the engine sight shield by lifting straight up.

2

Supercharger Inlet Duct Assembly

Tip
Remove the front section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement.

3

Ignition Coil Assembly Cover

Tip
Remove the ignition coil assembly cover by lifting straight up, if equipped.

4

Ignition Coil Assembly Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip

    • Do not remove these fasteners if replacing an individual ignition coil. If replacing an individual ignition coil, remove the appropriate bolt or stud.
    • Release the secondary lock and disconnect the main electrical connector from the coil assembly.

Tighten
10 N·m (89 lb in)

5

Ignition Coil Assembly Stud (Qty: 2)

Tip
Do not remove these fasteners if replacing an individual ignition coil. If replacing an individual ignition coil, remove the appropriate bolt or stud.

Tighten
10 N·m (89 lb in)

6

Ignition Coil Assembly

Tip
Ensure that the spark plug seals are in place during reassembly.

7

Ignition Coil Bolt (Qty: 4)

Tighten
10 N·m (89 lb in)

8

Ignition Coil (Qty: 4)

Tip

    • Disconnect the electrical connector from the ignition coil.
    • Ensure that the spark plug seals are in place during reassembly.

9

Spark Plug Seal (Qty: 4)