GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement .

  3. Object Number: 1739056  Size: SH
  4. Install oil drain pan under the vehicle.
  5. Remove the engine oil cooler hose/pipe from the external oil cooler. Refer to Generator Cooling Pipe/Hose Quick Connect Fitting .

  6. Object Number: 1739057  Size: SH
  7. Disconnect the engine oil cooler hose/pipe clip from the fan shroud.

  8. Object Number: 1739054  Size: SH
  9. Disconnect the engine oil cooler hose/pipe clip from the engine.

  10. Object Number: 1739055  Size: SH
  11. Remove the external engine oil cooler hose/pipe from the engine. Refer to Generator Cooling Pipe/Hose Quick Connect Fitting .
  12. Remove the external engine oil cooler hose/pipe from the vehicle.
  13. Remove and discard all engine oil cooler hose/pipe seals.

Installation Procedure


    Object Number: 1739055  Size: SH
  1. Install new engine oil cooler hose/pipe seals.
  2. Install the external engine oil cooler hose/pipe to the vehicle.
  3. Important: The quick connect fitting must be pushed on and then pulled back to verify proper connector engagement.

  4. Install the external engine oil cooler hose/pipe to the engine. Refer to Generator Cooling Pipe/Hose Quick Connect Fitting .

  5. Object Number: 1739054  Size: SH
  6. Connect the engine oil cooler hose/pipe clip to the engine.

  7. Object Number: 1739057  Size: SH
  8. Connect the engine oil cooler hose/pipe clip to the fan shroud.

  9. Object Number: 1739056  Size: SH

    Important: The quick connect fitting must be pushed on and then pulled back to verify proper connector engagement.

  10. Install the engine oil cooler hose/pipes to the external oil cooler. Refer to Generator Cooling Pipe/Hose Quick Connect Fitting .
  11. Remove the oil drain pan from under the vehicle.
  12. Install the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement .
  13. Refill the engine with oil and check for leaks.