GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

  2. Object Number: 1500599  Size: SH
  3. Disconnect the cooling fan control module electrical connector.

  4. Object Number: 1500602  Size: SH
  5. Remove the cooling fan control module retaining bolt.
  6. Remove the cooling fan control module from the vehicle.

Installation Procedure


    Object Number: 1500602  Size: SH
  1. Install the cooling fan control module to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the cooling fan control module retaining bolt and tighten to 6 N·m (53 lb in).

  4. Object Number: 1500599  Size: SH
  5. Connect the cooling fan control module electrical connector.
  6. Lower the vehicle.
  7. Refer to Control Module References for programming and setup information.