For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the right muffler assembly. Refer to Exhaust Muffler Replacement - Right Side.
- Disconnect the vent hose (2) from the EVAP vent valve (1).
- Remove the clamp from the vent hose.
- Remove the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement.
- Remove the EVAP canister access cover.
- Working through the right wheel house, disconnect the vent hose (3) from the EVAP canister.
- Remove the vent hose.
- Cap the EVAP vent valve and the EVAP canister in order to prevent possible EVAP system contamination.
Installation Procedure
- Remove the caps from the EVAP vent valve and the EVAP canister.
- Route the vent hose over the floor panel tunnel panel rear brace.
- Install the clamps on the vent hose.
- Connect the vent hose (3) to the EVAP canister.
- Connect the vent hose (2) to the EVAP vent valve.
- Install the right muffler assembly. Refer to Exhaust Muffler Replacement - Right Side.
- Install the EVAP canister access cover.
- Install the right rear wheelhouse liner panel. Refer to Rear Wheelhouse Panel Liner Replacement.
- Lower the vehicle.
Warning: Refer to Fuel and Evaporative Emission Pipe Warning in the Preface section.
