GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Steering 🢒 Power Steering 🢒 Power Steering Cooler Pipe/Hose Replacement

Power Steering Cooler Pipe/Hose Replacement Power Steering Gear to Cooler


Object Number: 1755846 Size: MF

Callout

Component Name

Preliminary Procedure

Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

1

Retaining Clip

Tip
Disconnect the return hose at the cooler.

2

Power Steering Cooler Pipe/Hose Line Fitting

Notice: Refer to Fastener Notice in the Preface section.

Tighten
27 N·m (20 lb ft)

3

Power Steering Cooler Pipe/Hose

Tip
Fill and bleed the Power Steering System. Refer to Power Steering System Bleeding .

Power Steering Cooler Pipe/Hose Replacement Cooler to Power Steering Reservoir

Removal Procedure
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the fuel injector sight shield. Refer to Intake Manifold Sight Shield Replacement or Fuel Injector Sight Shield Replacement .

    3. Object Number: 1756048 Size: SH
  3. Compress the clamp and disconnect the power steering cooler pipe/hose from the power steering reservoir.
  4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

    5. Object Number: 1756044 Size: SH
  5. Remove the retaining clip (1) and disconnect the power steering cooler pipe/hose from the cooler.

    6. Object Number: 1756039 Size: SH
  6. Remove the 2 power steering pipe/hose routing bolts.
  7. Remove the power steering cooler pipe/hose from the vehicle.

Installation Procedure
  1. Position the power steering cooler pipe/hose to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1756039 Size: SH
  2. Install the 2 power steering pipe/hose routing bolts.

    3. Tighten
    Tighten the 2 power steering pipe/hose mounting bolts to 11 N·m (97 lb in).


    Object Number: 1756044 Size: SH
  3. Connect the power steering cooler pipe/hose to the cooler and install the retaining clip (1).
  4. Lower the vehicle.

    5. Object Number: 1756048 Size: SH
  5. Compress the clamp and connect the power steering cooler pipe/hose to the power steering reservoir.
  6. Install the fuel injector sight shield. Refer to Intake Manifold Sight Shield Replacement or Fuel Injector Sight Shield Replacement .
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .