GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement.

  2. Object Number: 1224717  Size: SH
  3. Remove the retaining screw at the bottom of the trim panel.
  4. Pull the left trim panel outward to disengage the retaining clips from the I/P carrier.

  5. Object Number: 1224598  Size: SH
  6. Disconnect the electrical connectors.

  7. Object Number: 1224702  Size: SH
  8. Remove the electrical switches.

Installation Procedure


    Object Number: 1224702  Size: SH
  1. Install the electrical switches to the I/P trim panel.
  2. Connect the electrical connections to the I/P trim panel.
  3. Push on the left trim panel to engage the retaining clips to the I/P carrier.
  4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1224717  Size: SH
  5. Install the retaining screw at the bottom of the trim panel.
  6. Tighten
    Tighten the screw to 1.9 N·m (17 lb in).

  7. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement.