Front Fog Lamp Bulb Replacement XLR

1. Remove the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement.
2. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.




Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:

•	Turn off the lamp switch and allow the bulb to cool before changing the bulb.

•	Leave the lamp switch OFF until the bulb change is complete.

•	Always wear eye protection when changing a halogen bulb.

•	Handle the bulb only by its base. Avoid touching the glass.

•	Keep dirt and moisture off the bulb.

•	Properly dispose of the used bulb.

•	Keep halogen bulbs out of the reach of children.

3. Remove the fog lamp bulb/socket from the fog lamp by rotating the bulb/socket counterclockwise (1).



4. Remove the fog lamp bulb/socket (1).

1. Install the bulb/socket (1) to the fog lamp.



2. Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
3. Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
4. Inspect the fog lamp for proper operation.
5. Install the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement.
6. Aim the fog lamp. Refer to Fog Lamp Aiming.