GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the LH closeout trim panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the instrument cluster. Refer to Instrument Cluster Replacement .

    3. Object Number: 1237666 Size: SH
  3. Remove the park brake assembly attaching nuts (1) and bolt (2).

    4. Object Number: 658944 Size: SH
  4. Disconnect the park brake switch electrical connector.
  5. Disconnect the park brake release solenoid electrical connector.
  6. Position the park brake pedal assembly aside to gain access to the park brake warning lamp switch.
  7. Remove the park brake warning lamp switch retainer.
  8. Remove the park brake warning lamp switch from the park brake pedal assembly.

Installation Procedure
  1. Install the park brake warning lamp switch to the park brake assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the park brake warning lamp switch retainer.

    3. Tighten
    Tighten to 3 N·m (27 lb in).

  3. Position the park brake pedal assembly.
  4. Install the park brake pedal assembly retaining nuts and bolt.

    5. Tighten
    Tighten to 10 N·m (89 lb in).

  5. Connect the park brake release solenoid electrical connector.

    6. Object Number: 658944 Size: SH
  6. Connect the park brake switch electrical connector.
  7. Install the instrument cluster. Refer to Instrument Cluster Replacement .
  8. Install the LH closeout trim panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  9. Apply the park brake pedal and release 2-3 times, to ensure proper function of the park brake system.