GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Passenger Seat Cushion Ventilation Heating and Cooling Module Replacement

Removal Procedure
  1. Remove the seat cover and cushion. Refer to Passenger Seat Cushion Pad Replacement .
  2. Disconnect the electrical connector to the ventilation module.
  3. Cut the tie strap to the ventilation duct.

    4. Object Number: 1288836 Size: SH
  4. Remove the retaining screw from the ventilation module to the seat cushion wire frame.
  5. Remove the ventilation module from the seat.

Installation Procedure

    Object Number: 1288836 Size: SH
  1. Install the ventilation module to the seat cushion wire frame.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the retaining screw to the ventilation module.

    3. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).

  3. Connect the electrical connector to the ventilation module.
  4. Install the ventilation duct to the ventilation module and tie with a new strap.
  5. Install the seat cover and cushion. Refer to Passenger Seat Cushion Pad Replacement .