For 1990-2009 cars only
Removal Procedure
- Remove the windshield garnish molding. Refer to Windshield Garnish Molding Replacement .
- Disengage the retaining clips from the windshield bracket by grasping the antenna assembly at the windshield and sliding the assembly towards the passenger side of the vehicle.
- Lower the antenna coaxial cable from the windshield header.
- Disconnect the coaxial leads from the antenna base, and remove the antenna from the vehicle.
Installation Procedure
- Position the antenna assembly to the windshield and connect the coaxial leads to the antenna.
- Route the antenna coaxial cable to the windshield header.
- Align the antenna assembly to the windshield bracket retaining clips. Push the assembly to the driver side of the vehicle to engage the retainers.
- Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement .
