GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2006 🢒 XLR 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Rear Object Alarm Module Replacement

Removal Procedure
  1. Remove the trim assembly from the rear compartment panel stowage. Refer to Body Rear Compartment Replacement .

    2. Object Number: 1269130 Size: SH
  2. Remove the nuts from the rear object alarm detection module.
  3. Disconnect the electrical connector.
  4. Remove the module.

Installation Procedure

    Object Number: 1269130 Size: SH
  1. Connect the electrical connector.
  2. Align the module to the bracket.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts to the rear object alarm detection module.

    4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  4. Install the trim assembly to the rear compartment panel stowage. Refer to Body Rear Compartment Replacement .