Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

NEW Fluid Pump Seal

2

Torque Converter (with Fluid Pump) Housing Assembly

Notice: Ensure the turbine shaft (O-ring) seal is not installed prior to installing the torque converter housing assembly. The seal may become cut or damaged during installation of the torque converter housing assembly.

3

Bolts M10 x 50 (Quantity: 9)

Tighten
72 N·m (53 lb ft) in the sequence shown.

4

NEW Turbine Shaft (O-Ring) Seal