Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine Running | |||
Battery Voltage Signal | Data | Volts | 13.9 Volts |
Ignition Mode Switch | Data | IDLE / ACC/ OFF / CRANK | IDLE |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Electrical | Yes/No | No |
GEN F-Terminal Signal | Engine Electrical | % | 0% |
GEN L-Terminal Signal Command | Engine Electrical | On/Off | Off |
GEN L-Terminal Circuit Status | Engine Electrical | Incomplete / Short Gnd / Open / Short to B+ / OK | OK |
Ignition 1 Signal | Engine Electrical | Volts | Varies |
PNP Switch | Engine Electrical | Park / Neutral / In Gear | Park |
Starter Relay Command | Engine Electrical | On/Off | Off |
Starter Relay Circuit Status | Engine Electrical | Incomplete / Short Gnd / Open / Short to B+ / OK | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Electrical | Yes/No | No |
GEN F-Terminal Signal | Engine Electrical | % | 0% |
GEN L-Terminal Signal Command | Engine Electrical | On/Off | Off |
Ignition 1 Signal | Engine Electrical | Volts | Varies |
PNP Switch | Engine Electrical | Park / Neutral / In Gear | Park |
Starter Relay Command | Engine Electrical | On/Off | Off |
Starter Relay Circuit Status | Engine Electrical | Fault / Indeterminate / OK | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine Running | |||
Battery Voltage Signal | Data | Volts | 13.9 Volts |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Transmission in Park | |||
IMS | Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, INVALID, OPEN | Park |
