GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1224374  Size: SH
  1. Remove the I/P assembly. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector from the left air temperature actuator.
  3. Remove the actuator mounting screws.
  4. Remove the actuator.

Installation Procedure


    Object Number: 1224374  Size: SH
  1. Install the left air temperature actuator.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the actuator mounting screws.
  4. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  5. Connect the actuator electrical connector.
  6. Install the I/P assembly. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  7. Recalibrate the actuators. Refer to Actuator Recalibration .