GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 XLR 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Column Electronic Lock Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the steering column from the vehicle. Refer to Steering Column Replacement .
  3. Remove the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement in Wipers/Washer Systems.
  4. Remove the windshield wiper wash and switch assembly. Refer to Windshield Wiper and Washer Switch Replacement .
  5. Remove the multifunction switch assembly. Refer to Turn Signal Multifunction Switch Replacement .

    6. Object Number: 1406095 Size: SH

    Notice: Avoid damaging the steering column electronic lock harness by gently removing the plugs installed in the I/P beam. Do NOT twist, pull, bend, cut, or incorrectly route the harness. Damage to the harness will require replacement of the entire electronic lock.

  6. Remove the wire harness straps from the wire harness.
  7. Remove the electronic lock module lead from the wire harness assembly.
  8. Remove the electronic lock module from the steering column.

Installation Procedure

    Object Number: 1406095 Size: SH
  1. Install the electronic lock module onto the steering column.

    2. Notice: Avoid damaging the steering column electronic lock harness by gently removing the plugs installed in the I/P beam. Do NOT twist, pull, bend, cut, or incorrectly route the harness. Damage to the harness will require replacement of the entire electronic lock.

  2. Feed the electronic column lock lead into the wire harness assembly.
  3. Install new wire harness straps.
  4. Install the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement .
  5. Install the windshield wiper wash and switch assembly. Refer to Windshield Wiper and Washer Switch Replacement in Wipers/Washer Systems.
  6. Install the multifunction switch assembly. Refer to Turn Signal Multifunction Switch Replacement .
  7. Install the steering column into the vehicle. Refer to Steering Column Replacement .
  8. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.