For 1990-2009 cars only
Adjustment Procedure
- Place the transmission shift control lever 2 into the NEUTRAL position.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Slide the shift cable secondary lock 1 forward.
- With a small flat-blade screwdriver, reposition the shift cable primary lock 1 outward to UNLOCK the cable rod from the cable adjuster body.
- Ensure that the transmission range select lever and shifter are each in the NEUTRAL position.
- Press in on the cable primary lock 1 until seated.
- Slide the secondary lock 1 rearward.
- Lower the vehicle.
- Place the transmission shifter control lever 2 into the PARK position. Ensure that the vehicle is prevented from rolling when the shifter selector lever is in the PARK position.
- Make sure that the starter motor will not operate when the shifter selector lever is placed in the reverse or drive position.
