GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 XLR 🢒 Engine 🢒 Engine Controls - 4.6L (LH2) 🢒 Ignition Coil Replacement - Bank 2

Removal Procedure

    Object Number: 1272602 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Disconnect the ignition coil wiring harness electrical connector from the coil that is being replaced.

    3. Object Number: 1283865 Size: SH
  3. Remove the ignition coil retaining bolt.
  4. Remove the ignition coil.

Installation Procedure

    Object Number: 1283865 Size: SH

    Important: Ensure that the spark plug seal is in place when installing the ignition coil.

  1. Install the ignition coil.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the ignition coil retaining bolt.

    3. Tighten
    Using the installation torque sequence, tighten the ignition module retaining bolts to 10 N·m (89 lb in).

  3. Reconnect the ignition coil electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .