Electronic Navigation Antenna Replacement U3R, U3S, U3Q

1. Remove rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
2. Disconnect the GPS antenna wire harness from the retaining clips on the rear shelf trim panel.
3. Remove the pushpins (1) retaining the GPS antenna (2) to the rear shelf trim panel by pulling out on the center of pushpin and then pulling out the entire pushpin assembly.



4. Remove the GPS antenna (2) assembly from the rear shelf trim panel.

1. Install the GPS antenna (2) to the rear shelf trim panel.
2. Install the pushpins (1) through the GPS antenna to the rear shelf trim panel.

Push the center of the pin down in order to lock the pins (1) in place.




3. Install the GPS wiring harness to the retainers on the rear shelf trim panel in order to retain the wiring harness to the rear shelf trim panel.
4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.