Removal Procedure
- Remove the cruise control cable. Refer to Cruise Control Cable Replacement .
- Remove the electrical connector from the cruise control module assembly (1).
- Remove the fasteners (2) from the mounting studs.
- Remove the cruise control module assembly (1) from the vehicle.
- Remove the fasteners (3) that retain the cruise control module bracket (2) to the cruise control module.
- Remove the cruise control module bracket (2) from the cruise control module (1).
Installation Procedure
- Install the cruise control module (1) to the bracket (2).
- Install the cruise control module bracket fasteners (3).
- Install the cruise control module (1) onto the studs on the cowl.
- Install the fasteners (2).
- Connect the electrical connector to the cruise control module (1).
- Install the cruise control cable. Refer to Cruise Control Cable Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the fasteners to 7.5 N·m (66 lb in).
Tighten
Tighten the cruise control mounting fasteners to 9 N·m
(80 lb in).
Important: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.
