Stop Lamp Switch Replacement LHD

1. Remove the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
2. Disconnect the electrical connectors from the switch.
3. Rotate the stop lamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.

Important: The stop lamp switch is self adjusting when installed properly in the fully locked position. The twist lock type switch requires no further adjustment.

1. Install the stop lamp switch into the retainer.



2. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
3. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
4. Connect the stop lamp/ABS/shift lock switch electrical connectors to the stop lamp switch (2).
5. Install sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.

Stop Lamp Switch Replacement RHD

1. Remove the right closeout/sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.



2. Disconnect the electrical connectors from the switch.
3. Rotate the stop lamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.

Important: The stop lamp switch is self adjusting when installed properly in the fully locked position. The twist lock type switch requires no further adjustment.

1. Install the stop lamp switch into the retainer.



2. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
3. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
4. Connect the stop lamp/ABS/shift lock switch electrical connectors to the stoplamp switch (2).
5. Install the right closeout/sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.