Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Is the voltage greater than the specified value? | 8 Volts | ||
2 | Using a DMM, measure the voltage between the negative battery terminal and the engine block while cranking for at least 15 seconds. Is the voltage less than the specified value? | 0.5 Volts | ||
3 | Using a DMM, measure the voltage between the positive battery terminal and the starter solenoid terminal B while cranking for at least 15 seconds. Is the voltage less than the specified value? | 0.5 Volts | ||
4 | Repair or replace the starter motor. Refer to Starter Motor Replacement . Is the repair complete? | -- | -- | |
5 | Perform the battery load test, refer to Battery Load Test . Does the battery pass the battery load test? | -- | ||
6 | Inspect the battery and starter terminals for poor contact. If OK, repair or replace the starter motor. Refer to Starter Motor Replacement . Is the repair complete? | -- | -- | |
7 |
Is the replacement complete? | 0.5 Volts | -- | |
8 |
Is the replacement complete? | 0.5 Volts | -- | |
9 | Replace the battery. Refer to Battery Replacement . Is the replacement complete? | -- | -- | |
10 | Repeat the Starting System Check. Refer to Starting System Check . Is the system check complete? | -- | System OK | -- |
