| Table 1: | Vehicle Stability Control Module Scan Tool Data Parameters |
| Table 2: | Vehicle Stability Control Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Accel. Sen. Lateral 1 Signal | -- | Varies | This displays °. |
Accel. Sen. Lateral 2 Signal | -- | Varies | This displays °. |
Accel. Sen. Yaw 1 Signal | -- | Varies | This displays °/sec. |
Accel. Sen. Yaw 2 Signal | -- | Varies | This displays °/sec. |
Accel. Sensor Longitudinal Signal | -- | 0 m/s² | This displays m/s². |
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Steering Position Sensor Signal | -- | Varies | This displays °. This is the current degree position of the steering position sensor. |
Steering Position Sensor Status | -- | Centered | The scan tool displays Centered or Uncentered. This is the current status of the steering position sensor. |
Output Control | Description |
|---|---|
Acceleration Sensor Reset | This output control is used to reset the acceleration sensor. |
Steering Position Sensor Centering | This output control is used to center the steering position sensor. |
VSCM Power Steering Reset | This output control is used to reset the vehicle stability control module (VSCM) power steering. |
